TPVAD Adjustable RPM pump
Peristaltic pump designed to move liquids of low to high viscosity from source to destination at user-set speeds from 50 to 350 RPM. The easily accessible controls provide for Priming, dynamic Braking, setting RPM, and Reversing Flow direction. There is also a Power LED.
Principle of Operation
Flexible tubing, which conveys fluid from source to destination, is squeezed inside the pump head by rotating rollers against a rigid, crescent-shaped occlusion wall. The rollers induce suction in a gently pulsing rhythm. The unique tubing holder subassembly is adjustable to increase pressure, or to decrease pressure for extended tubing life.
Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when rotated beneath the pump, to serve as a base that lifts and angles the pump face, making the controls even more easily user-accessible.
| SPECIFICATIONS |
| TUBING INSIDE DIAMETERS: 1/4, 5/16, 3/8 |
| TUBING WALL THICKNESS: 1/16 in. |
| RECOMMENDED TUBING MATERIALS: Tygon® E-3603, peroxide-treated silicone, platinum-treated silicone, PharMed®, Versilic® silicone, Tygon® Sanitary silicone, Norprene®, Tygon® Long Flex Life, and Hypalon® |
| FUSES: Two 2-Amp, 250 V, fast-acting, glass, 5 x 20 mm, UL-listed |
| PUMPING SPEED: adjustable from 50 to 350 RPM |
| POWER SUPPLY: power cord & transformer for Europe |
| ELECTRICAL REQUIREMENT: 90 - 264 VAC |
| MAXIMUM LIFT, PUMP HEAD: 310 in. H2O (11.2 psig) |
| MAXIMUM SUCTION, PUMP HEAD: 310 in. H2O (11.2 psig) |
| DIMENSIONS: 7.70 in. (195.6) wide x 6.56 in. (166.2 mm) high x 7.45 in. (189.2mm) deep (excluding handle) |
| MATERIALS OF CONSTRUCTION: anodized aluminum, 316 stainless steel rollers and shafts |
TPV Pump Flow Rates
